What are the characteristics of the cutting ring for pump cobbler plates?

With the increase in concrete pumping height and pumping concrete strength, resulting in a substantial increase in pumping pressure makes the working conditions of concrete equipment wear parts more severe, and the use of wear parts to improve the performance of higher requirements.

The spectacle plate is a part of the pump truck pumping distribution valve, connected to the concrete conveying cylinder, the moving part S pipe is driven by the swing cylinder, swinging from one side of the concrete cylinder mouth to the other side of the concrete cylinder mouth, the cutting ring swings with the S pipe against the spectacle plate, and the spectacle plate is composed of cutting friction. Due to the rapid oscillation of the cutting ring the spectacle plate generates strong friction with the concrete and at the same time has to withstand the impact force generated by the cut-off stones. The cobalt plate must therefore withstand impact forces, shear forces and very strong friction in its normal working condition.

What are the characteristics of the cutting ring of the pump cobalt plate?

Characteristics of pump cobalt cutting rings.

1. Our cobalt cutting rings provide a wear-resistant ceramic that matches the cobalt plate and is glued to the working surface of the cobalt plate using a special strong adhesive. This new material is more favourably priced than carbide and has a high degree of hardness and very good toughness.

2、The square quantity of cutting ring of pump truck glasses plate is higher than that of alloy material, in which the use of cutting ring is 20,000 square, and the use of glasses plate is 40,000 square.

3, pump truck glasses plate cutting ring long service life, and simple and convenient installation, the surface is smooth as a mirror, greatly reducing the friction and shear force.