What causes alloy spectacle plates to af...
The spectacle plate, also known as the wear plate, is an important part of the c...
Zhuzhou Xianghao Machinery Manufacturing Ltd. is a professional production, research and development, sales in one of the alloy spectacle plate, alloy cutting ring, carbide spectacle plate, carbide cutting ring, and S pipe, S pipe valve, and other fine stone pump truck spectacle plate, cutting ring and other concrete pump accessories.
Ans Today Xianghao cobalt plate manufacturers explain two very important parts in pump trucks - cobalt plates and cutting rings. There are many parts of the pump truck, although we will use the pump truck on a daily basis, but it is also very necessary to have an understanding of these local parts. Here are a few points of knowledge we have summarised for you, concrete pump truck knowledge spectacle plate and cutting ring. We hope this can be used for your reference.Glasses plate is also called wear plate, is an important part of the concrete pump truck. The shape is like glasses plate so called glasses plate. Currently commonly used production materials are.(1) high chrome alloy cast iron(2) Tungsten carbide(3) Cemented carbide(4) Alloy ceramicsPump parts alloy spectacle plates and cutting ringsThe cutting ring is also known as the wear ring and is an important part of a concrete pump truck. It is shaped like a circular ring. The working state does shear movement so called cutting ring....
Ans The eye plate, also known as the wear plate, is a very important accessory for concrete pump machinery, because the shape is similar to the glasses plate called glasses plate, cutting ring, also known as the wear ring, the shape is like a circular ring, working condition to do shear movement so called cutting ring. Glasses plate and cutting ring are both important accessories for fine stone concrete pump, the role and use of the same.To improve the service life of the spectacle plate cutting ring, the first step is to start from the following aspects1. The concrete ratio of each site is different, there are differences, resulting in serious wear and tear glasses plate, cutting ring. Therefore, we should try to improve the concrete ratio, so that the service life of the glasses plate and cutting ring can be longer.2. Large differences in pumping conditions at each site. When concrete is pumped at high heights and long distances, the spectacle plates and cutting rings will be subjected t...
Ans Blockage at the discharge port of the distribution valvePhenomenon: sudden interruption of pumping system action, with strange noise and strong vibration, but no corresponding vibration in the pipe.Exclusion method: Pour 15-30 litres of cement slurry into the hopper and make the pump start repeatedly in the forward and reverse direction to force open the pathway. If this method is not effective, it can only be excluded manually and it is recommended to remove the connected pipe and remove the debris inside the valve.What to do when the S pipe valve is blocked?Blockage at the S pipe valveThe main reason is that after the concrete is pumped, it is not flushed with high-pressure water in time, resulting in residual concrete inside the pipe, which gradually thickens and solidifies over time, causing blockage.Exclusion method: After pumping concrete, use high pressure water to flush the pump body and S pipe clean. If flushing is not effective, use a brazing pick to remove the residue until ...
186-7088-5555
Mobile:186-7088-5555 Q Q:942421026
E-mail:942421026@qq.com Address:No.24, Xinmin Yicun, Tianxin Street, Shifeng District, Zhuzhou City, Hunan Province